Plinth navy pill organizer partly open with Monday, Tuesday and Wednesday filled

Slim 7-Day Pill Organizer with a Slide Lock for Travel | Plinth

Navy
$500.00 USD
Sale price  $500.00 USD Regular price 
Skip to product information
Plinth navy pill organizer partly open with Monday, Tuesday and Wednesday filled

Best Seller

The Glasses Stand - STANZA

Eyeglass Holder Stand - Sunglasses Display Stand & Desk Organizer for Glasses

$500.00 USD
Sale price  $500.00 USD Regular price 

Free Shipping on $50+ Orders

Color
Product Details

Plinth is a weekly pill organizer shaped like a bar, not a tray. Seven compartments run in a single line, Monday at one end and Sunday at the other. The outer sleeve slides off and the whole week is in front of you.

Flat weekly trays live on a counter because that is the only place they work. This one was drawn to be picked up and taken along. It is narrow enough to sit beside a keyboard, and it drops into a handbag without turning sideways.

HOW THE LOCK WORKS
Push the button on the side of the sleeve to the right and the tray locks in place. It will not slide out until you push the button back to the left. There is nothing to line up and nothing to press at the same time, and there are no magnets and no metal hardware anywhere in the case.

HOW IT OPENS
With the button to the left, slide the inner tray out of the outer sleeve to reach the compartments. Each day is marked Mon through Sun.

WHAT YOU GET
- 7 compartments, one per day, marked Mon through Sun
- Slide button lock: right to lock, left to release
- Sleeve-and-tray design, no hinge
- Matte PLA body, no gloss
- Navy, or Navy and Cream
- Overall 8.1" L x 1.7" W x 1.4" H (20.6 x 4.3 x 3.6 cm)
- Each compartment 1.0" W x 1.1" L x 0.9" D (25 x 28 x 23 mm)
- 5.3 oz (150 g)

WILL YOUR PILLS FIT
A compartment measures 25 x 28 x 23 mm. Hold your largest capsule up to a ruler and compare, and that one check settles it. The photographs show all seven compartments loaded with everyday supplements, so you can read the scale against real softgels and tablets.

HOW BIG IT ACTUALLY IS
At 8.1 inches it runs a little longer than a phone. It fits a handbag, a backpack pocket, a coat pocket, a glovebox or a carry-on. It will not go in a jeans pocket, and we would rather say so here than have it arrive as a surprise.

ON THE FINISH
Each Plinth is printed one at a time, so fine layer lines and small surface variations show up under raking light. That is what the process leaves behind, and it means no two are identical.

PAIRS WELL WITH
Plinth carries a week of supplements. Viala is the fitted case for small vials and the supplies that go with them, and the rest of the range is in Storage Cases.

MATERIAL AND CARE
PLA body. Wipe clean with a soft, dry cloth. Keep away from direct heat and prolonged sun.

MADE TO ORDER
Printed in small batches once you order. Ships within 3-7 business days with tracking.

Care & Maintenance
  • Wipe exterior with a soft, dry cloth
  • Do not immerse in water
  • Avoid prolonged direct sunlight to preserve color
  • Do not use alcohol or abrasive cleaners on the felt interior
  • Keep away from high heat sources
Return Policy

Returns are accepted within 30 days of delivery. Return shipping costs are the customer’s responsibility unless the item is defective, damaged, or incorrect. See our full policy for details

Made to Order  ·  Ships in 3–7 Business Days
New Arrival
Form and Fix  /  Eyewear

Eyeglass
Holder Stand

A sculptural little stand for the glasses you actually wear every day.

$17.99 Free U.S. shipping over $50
Lens-Safe Cradle
Sculptural Design
Made to Order

A sculptural stand for the glasses you actually wear every day. This eyeglass and sunglasses holder features a modern trapezoid silhouette in matte navy with a signature red-and-white racing stripe — a small, confident detail that reads like a piece of desk decor rather than a functional accessory.

The notched top cradles your frames securely by the bridge, keeping lenses off the surface and temples open for easy one-hand pickup — whether it's your everyday readers, prescription glasses, or your favorite aviators.

Why You'll Love It
Sculptural trapezoid design with a bold red/white stripe accent
Notched cradle securely holds one pair of glasses or sunglasses by the bridge
Keeps lenses off the surface and away from dust when not in use
Matte finish resists fingerprints and shows a fine, intentional printed texture
Compact footprint — fits nightstands, vanities, and desks without crowding the space
Printed in durable PLA, made to order in small batches
1
Pair
Held
0
Assembly
Required
100%
Made
to Order
Where It Lives

Nightstand, vanity, entryway console, or office desk — it brings the same curated, editorial feel as a boutique optical shop to your own space.

Stanza eyeglass holder stand on a wooden dresser with sunglasses
On the Dresser
Keeps your everyday sunglasses upright and ready to grab on the way out.
Stanza eyeglass holder stand on a desk holding readers
On the Desk
A quiet place for your readers between meetings, instead of a drawer.
Behind the Design

Most glasses stands are an afterthought — a plain peg or a wire loop. This one started from the opposite question: what if the thing holding your glasses looked as considered as the glasses themselves?

The trapezoid shape gives it a low, stable footprint with a strong presence on a shelf, and the racing stripe ties it back to the same navy-and-stripe language as the rest of the Form and Fix eyewear line.

Stanza eyeglass holder stand with sunglasses, matte navy trapezoid desk organizer
Good to Know
MaterialPLA
DesignModern trapezoid silhouette, matte navy with red/white racing stripe
CradleNotched top holds glasses securely by the bridge
CapacityHolds one pair of glasses or sunglasses
FinishMatte, fingerprint-resistant
Size1.76 × 2.32 × 2.19 in  /  4.5 × 5.9 × 5.6 cm
MadeMade to order — ships within 3–7 business days with tracking
Care

Wipe clean with a soft, dry cloth. Keep away from direct heat or prolonged sun exposure — like most PLA items, it can soften above roughly 50°C / 120°F.

Gifting

A thoughtful gift for glasses wearers, new movers, or anyone who wants their nightstand or desk to look a little more put-together.

Pairs Well With
Ocula Glasses Case
Ocula
Hard-shell glasses case for when you're on the move.
Shop Ocula
Valeta eyeglass valet tray, navy ribbed
Valeta
Curved valet tray for glasses, keys, and everyday catchall.
Shop Valeta
FAQ
Printed in durable PLA with a matte finish.
One pair at a time, cradled securely by the notched bridge rest.
The notch is shaped to hold your frames by the bridge and temples, so lenses stay clear of the stand's surface. As with any stand, wipe the cradle occasionally so grit doesn't build up.
Wipe with a soft, dry cloth. Avoid heat and direct sun, which can soften PLA over time.
1.76" H × 2.32" W × 2.19" L (4.5 × 5.9 × 5.6 cm).
Yes — each stand is 3D printed to order in small batches and ships within 3–7 business days with tracking. Colors may vary slightly by monitor.

Related items